Moisture Mapping and Assessment
We use thermal imaging cameras and moisture meters to find every wet spot. This tells us exactly how much drywall to remove. You get a clear scope and price before we cut.
When a pipe bursts or a ceiling stains, drywall and ceiling water damage repair Annapolis MD homeowners call us first. We cut out soggy drywall, dry the framing, and rebuild your walls and ceilings so they look untouched. Whether it's a basement ceiling water damage repair Annapolis MD job or a small patch, we handle it same-day across Anne Arundel County.

Drywall and ceiling water damage repair is the process of removing wet, crumbling drywall and ceiling panels, drying the framing behind them, and installing new moisture-resistant board, tape, and paint. Water wicks up drywall fast, and once the paper facing gets soaked, it loses strength and grows mold within 24 to 48 hours. We use moisture meters and thermal imaging cameras to map exactly how far the water traveled before we cut.
In Annapolis, most calls come from burst pipes, sump pump failure, and heavy rain flooding. Older homes in the Historic District have plaster and lath that holds water longer than modern drywall. If you search for water damaged drywall replacement Annapolis Maryland, you want a crew that can dry the structure and rebuild it in one visit. We do both.
Every job includes the full scope from moisture mapping to paint-ready finish. We do not leave you with open walls or a half-done repair. Here is what is covered.
We use thermal imaging cameras and moisture meters to find every wet spot. This tells us exactly how much drywall to remove. You get a clear scope and price before we cut.
We remove standing water with submersible pumps and truck-mounted extractors. Then we set air movers and dehumidifiers to dry the framing. Drying takes two to four days with daily checks.
We cut out all saturated drywall and ceiling board, usually 12 to 24 inches past the visible water line. We bag and haul away every piece. This exposes the framing so it can dry.
We hang new moisture-resistant drywall, tape, mud, sand, and texture to match. Ceilings get the same treatment. You get a paint-ready surface that blends into the existing wall.
We walk the job with you, check every seam, and confirm moisture readings are normal. We clean up and haul away all debris. You get a written warranty on workmanship.
You call, we answer. Within minutes we dispatch a crew with moisture meters and thermal imaging cameras. We find the source, stop the water, and mark how far the moisture traveled. You get a clear scope and price before we cut anything. Most assessments take 30 to 45 minutes.
We pull standing water with submersible pumps and truck-mounted extractors, then set air movers and dehumidifiers. Drying typically takes two to four days. We check moisture readings daily and do not move to repair until the framing reads dry.
We cut out all saturated drywall and ceiling board, usually 12 to 24 inches past the visible water line. This exposes the framing so it can dry. We bag and haul away every piece. The room looks rough at this stage, but it is the only way to prevent hidden mold.
Once the cavity is dry, we hang new moisture-resistant drywall, tape, mud, and sand. Ceilings get the same treatment. We match texture and prime the surface. Most rebuilds take one to three days depending on square footage. You get a paint-ready finish.
We walk the job with you, check every seam, and confirm moisture readings are back to normal. We clean up and haul away all debris. You get a written warranty on workmanship. If anything looks off in the first year, we come back at no charge.
You call, we answer. Within minutes we dispatch a crew with moisture meters and thermal imaging cameras. We find the source, stop the water, and mark how far the moisture traveled. You get a clear scope and price before we cut anything. Most assessments take 30 to 45 minutes.
We use thermal cameras to see temperature differences behind walls. This reveals hidden moisture without cutting. It tells us exactly where the water traveled.
These pin and pinless meters measure water content in drywall and framing. We use them to decide what to cut and when drying is complete.
We set Dri-Eaz and Phoenix Restoration Equipment air movers and dehumidifiers to dry the framing fast. This prevents mold and makes sure new drywall does not fail.
For standing water, we use truck-mounted extractors to pull hundreds of gallons quickly. This speeds up drying and reduces damage.
When water is deep, submersible pumps remove it before we can start extraction. We carry them on every truck.
We use DeWalt and Milwaukee drywall guns, tapers, and sanders for a clean, fast rebuild. The right tools mean less dust and a better finish.

A pipe burst above the kitchen ceiling, soaking a 4x6 foot section. The drywall was sagging and stained brown. Water had been sitting for two days. The homeowner was worried about mold.
After: We cut out the damaged drywall, dried the joists for three days, and installed new moisture-resistant board. We matched the texture and painted. The ceiling looks original. Moisture readings were normal at final walkthrough.
Book this service →
A sump pump failed during a storm and flooded the basement. The ceiling drywall was soaked and starting to crumble. The homeowner had already pulled out wet boxes and furniture.
After: We pumped out the water, removed the damaged ceiling drywall, and dried the framing with air movers and dehumidifiers. After four days, we rebuilt the ceiling with moisture-resistant board. The basement was dry and ready to use.
Book this service →
A roof leak soaked a plaster wall in a 1920s home. The plaster was soft and cracking. The homeowner wanted to preserve the historic character. They were worried a modern repair would look out of place.
After: We dried the plaster slowly with low-heat air movers. We removed only the damaged section and repaired it with a plaster-matched patch. The texture blends perfectly. The wall is solid and looks original.
Book this service →Water damage shows up in different ways. Here are the most common problems we fix for Annapolis homeowners.
Ask a pro →We cut out the failed section, dry the joists, and install new moisture-resistant board. We match the texture so the patch disappears. Most ceiling repairs are done in one to two days.
We trace the stain to its source with moisture meters, cut out the wet drywall, dry the cavity, and rebuild. You get a clean, stain-free surface that stays that way.
We remove the damaged section, dry the framing, and replace it with moisture-resistant board. We also check for hidden mold and treat the cavity before closing it up.
We remove the moldy drywall, treat the framing with an antimicrobial, and dry the cavity. Then we rebuild with new board. We follow ANSI/IICRC S520 standards for mold remediation.
$350 - $1,800 depending on scope
Most drywall and ceiling water damage repairs in Annapolis run $350 to $1,800 in 2026. The price depends on square footage, whether drying equipment is needed, and the type of drywall. We give you a written estimate before we start. No hidden fees. If you need water damaged drywall repair Annapolis Maryland, call us for a free estimate. We work with insurance to cover the cost.
Our pricing covers the full job: moisture mapping, drying, removal, rebuild, and finish. You get a paint-ready surface and a written warranty. No surprise charges.
The more drywall that needs removal and replacement, the higher the cost. A small patch is cheaper than a full ceiling. We measure exactly and price by the square foot.
Get a quote ↗If the framing behind the drywall is wet, we need air movers and dehumidifiers. This adds to the cost but prevents mold. Drying typically takes two to four days.
Get a quote ↗Plaster and lath repairs cost more because they take longer to dry and require special skills. Modern drywall is faster and less expensive to replace.
Get a quote ↗Popcorn and orange peel textures take extra time to match. Smooth walls are faster. We always match the existing texture so the patch disappears.
Get a quote ↗“A pipe burst above our kitchen and soaked the ceiling. Annapolis Flooded Basement Cleanup came out same day, cut out the wet drywall, and set up drying equipment. Three days later they rebuilt the ceiling and matched the texture perfectly. You cannot tell it was ever damaged. Fair price and no mess left behind.”
Karen M.Homeowner, Eastport
✓ Verified“Our basement ceiling was sagging from a sump pump failure. They removed the damaged drywall, dried the joists, and replaced the whole ceiling. The crew was on time, explained every step, and handled the insurance paperwork. I would call them again without hesitation.”
Dave R.Homeowner, Cape St. Claire
✓ Verified“Old plaster walls in our 1920s home got soaked from a roof leak. They knew exactly how to handle plaster and lath, dried it out, and repaired the ceiling. The finish blends right in. They were careful with our antique furniture too. Highly recommend for any water damage repair.”
Linda S.Homeowner, Historic District
✓ VerifiedMost drywall and ceiling repairs in Annapolis run $350 to $1,800 in 2026, depending on square footage and whether drying equipment is needed. A small ceiling patch starts around $350. A full basement ceiling rebuild with drying can reach $1,800. We give you a written price before we cut. No surprises.
If the drywall is soft, crumbling, or shows mold, it needs replacement. Drywall that got wet but dried within 24 to 48 hours and still feels firm can sometimes be saved with drying and sealing. We test with a moisture meter. If readings are high, we cut it out. If not, we dry and treat it.
Drying takes two to four days. Removal and rebuild take one to three days for most rooms. A small ceiling patch can be done in one day. A full basement ceiling with drying and rebuild usually takes five to seven days total. We give you a schedule on day one and stick to it.
Yes, if the ceiling is sagging, stained, or soft. A water damaged ceiling loses strength and can collapse. We cut out the failed section, dry the joists, and install new moisture-resistant board. For popcorn ceiling water damage repair Annapolis MD, we match the texture so the patch disappears.
Water-soaked drywall gets worse every hour. Call us now for same-day service. We are licensed, insured, and have 15 years in Annapolis. One call and we handle drying, repair, and finish.
Call Now 4107090950 →Basements do not flood on a schedule. When yours does, call 410-709-0950. We answer 24/7 and dispatch a crew within the hour. You can also email us at info@annapolisfloodedbasementcleanup.com. We serve all of Annapolis and Anne Arundel County.